visit NAVAL VALVES site
bullet pointSPECIALIST BALL VALVES
Series 1500 High Pressure
Single Piece End Entry
Three Piece Ball Valve
Full Bore Ball Valve
Wafer Ball Valve
Multiport
bullet pointGATE VALVES
bullet pointCHECK VALVES
bullet pointVALVE PACKAGE SUPPLY
bullet pointValves Supplied - Gallery
bullet pointCONTACT US
Company
Enquiry Form
Quality / Approvals
Equipment Directive
bullet pointHome
 
Full Bore Ball Valves
Full bore ball valves data sheet download
Brochure download
The Brooksbank range of full bore ball valves has been developed spefically to meet the requirements of today's demanding environments.
Brooksbank Valves

Full bore ball valves offer minimal pressure drop & are the prime choice where pigging of process lines is a major consideration. Brooksbank full bore floating ball valves are available in weight saving single piece end entry design up to 1" and as a split 2 piece body in sizes 11/2" and above.
Full Bore Ball Valves

Sizes: ½" to 10"

Rating: Up to ANSI 600
Full Bore Ball Valves
STEM YIELD TORQUES
Based on commercial spec. NI.AL.BR (EN 12163 CW307G R680). These figures are for clean water at full design pressure, with valves fitted with virgin PTFE seats. Operation at least once each day. These figures do not include any safety factors. Please refer to Brooksbank Valves Ltd. for other conditions.

Manufactured from a full range of materials including:

  • Aluminium Bronze - European & American Specs.
  • Gunmetal - European & American Specs.
  • Duplex
  • Super Duplex
  • Titanium
  • Hastelloy®
  • Monel
  • 254 SMO
  • Other materials available on request

Features include:

  • Anti static, anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Solid ball
  • Single Piece End Entry in sizes 1" & below
  • Bolted body on sizes 11/2" & above
  • ISO 5211 mounting platform
  • Removal of lever for actuation does not compromise seal integrity
  • Chevron packing on sizes 2" & above
  • Other flange standards on request

Manufacturing Standards:

  • Designed generally in accordance withAPI 6 D & EN 17292 (Formerly BS5351)
  • Wall thickness in accordance with ANSI B16.34
  • Face to face dimensions in accordance with ANSI B16.10
  • Flange dimensions in accordance with ANSI B16.5
  • Bronze material in accordance with
  • ANSI B16.24

© Brooksbank Valves Limited. Sackville Street, Skipton, North Yorkshire BD23 2PS
Tel: +44 (0)1756 792346 • Fax: +44 (0)1756 792347