Floating ball valves for oil and gas seawater systems
Brooksbank Valves Ltd.Specialists in Oil & GasValve Solutions................  operating on seawater systems globally

Oil & Gas Seawater Systems Ball Valves - Floating

Ball Valves – Floating Ball: The floating ball valve is a quarter turn valve which uses a rotating ball with a hole through it, which can be aligned with the flow path (open Position) allowing flow and blocks flow when the ball is rotated by 90 degrees. A floating ball is where the ball is allowed to float against the seals. In normal operation, the ball will float downstream slightly, causing the seating mechanism to compress under the ball pressing against it, thus using the system pressure to increase valve sealing. Ball valves are used for on/off and throttling services.

BAV01 1pc cast - RB

BAV01 1pc cast - RB

BAV02 1pc cast - FB

BAV02 1pc cast - FB

BAV03 2pc cast - RB

BAV03 2pc cast - RB

BAV04 2pc cast - FB

BAV04 2pc cast - FB

BAV01 1pc cast - RB

BAV01

Floating ball valve

The BAV01 is a 1 Piece end entry, reduced bore floating ball valve, with integral cast flanges. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC.

Standard Range, Sizes: 3/4" to 12" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Firesafe by design
  • ISO 5211 mounting platform 
  • Chevron packing on sizes ≥3” 
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others) 
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV02 1pc cast - FB

BAV02

Floating ball valve

The BAV02 is a 1 Piece end entry, full bore floating ball valve, with integral cast flanges. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC.

Standard Range, Sizes: 1/2" to 1-1/4" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Firesafe by design
  • ISO 5211 mounting platform 
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others) 
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV03 2pc cast - RB

BAV03

Floating ball valve

The BAV03 is a 2 Piece side entry, reduced bore floating ball valve, with integral cast flanges. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 3/4" to 12" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Firesafe by design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV04 2pc cast - FB

BAV04

Floating ball valve

The BAV04 is a 2 Piece side entry, full bore floating ball valve, with integral cast flanges. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 10" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Firesafe by design
  • ISO 5211 mounting platform
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV05 wafer - RB

BAV05 wafer - RB

BAV06 wafer - FB

BAV06 wafer - FB

BAV07 3pc cast - RB

BAV07 3pc cast - RB

BAV08 3pc cast - FB

BAV08 3pc cast - FB

BAV05 wafer - RB

BAV05

Wafer floating ball valve

The BAV05 is a reduced bore wafer type floating ball valve. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 3" / Connections: Wafer ANSI 150

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV06 wafer - FB

BAV06

Wafer floating ball valve

The BAV06 is a full bore wafer type floating ball valve. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 6" / Connections: Wafer ANSI 150

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV07 3pc cast - RB

BAV07

Floating ball valve

The BAV07 is a 3 Piece bolted, reduced bore floating ball valve. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes:
Screwed 3/4" to 3"
Flanged 3/4" to 6"
Connections: Screwed, ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform on 1-1/4" & above.
  • Chevron packing on sizes ≥3”
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B1-20.1 Screwed Ends with overall length to manufacturers standard
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV08 3pc cast - FB

BAV08

Floating ball valve

The BAV08 is a 3 Piece bolted, full bore floating ball valve. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 4" / Connections: Screwed, ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform on 1" & above.
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B1-20.1 Screwed Ends with overall length to manufacturers standard
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV09 Multiport - RB

BAV09 Multiport - RB

BAV10 Multiport - FB

BAV10 Multiport - FB

BAV11 Top Entry - RB

BAV11 Top Entry - RB

BAV110 3pc  - FB

BAV110 3pc - FB

BAV09 Multiport - RB

BAV09

Multiport floating ball valve

The BAV09 is a flanged modular multiport diverter floating ball valve, with  2, 3 or 4 ports. Available in "L" or "T" reduced port configurations. Suitable for mixer applications. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC.

Standard Range, Sizes: 1-1/2" to 8" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV10 Multiport - FB

BAV10

Multiport floating ball valve

The BAV10 is a flanged modular multiport diverter floating ball valve, with  2, 3 or 4 ports. Available in "L" or "T" full port configurations. Suitable for mixer applications. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC.

Standard Range, Sizes: 1" to 6" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV11 Top Entry - RB

BAV11

Floating ball valve

The BAV11 is a top entry, reduced bore floating ball valve, with integral cast flanges. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 8" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV110 3pc  - FB

BAV110

3 pc bolted body - FB ball valve

The BAV110 is a 3 Piece bolted body, full bore floating ball valve. Manufactured as standard in NiAlBr giving long service life on seawater applications.

In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/4" to 2"
Connections: Screwed.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®

Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.34 Wall Thickness
  • ANSI B1-20.1 Screwed Ends
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV114 3pc bolted body RB

BAV114 3pc bolted body RB

BAV117 3pc bolted body FB

BAV117 3pc bolted body FB

BAV118 2pc Forged FB

BAV118 2pc Forged FB

BAV119 2pc Forged RB

BAV119 2pc Forged RB

BAV114 3pc bolted body RB

BAV114

3 pc bolted body - RB ball valve

The BAV114 is a 3 Piece bolted body, reduced bore floating ball valve, with optional connections. Manufactured as standard in NiAlBr giving long service life on seawater applications.

In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 3"
Connections: Screwed & PN16.

Screwed rating: 300#

Materials

Regularly manufactured in a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800                  
  • Nickel Aluminium Bronze  - DS02 747 Part 3         
  • Gunmetal – DS02 830 Part 1       
  • Bronze – ASTM B61/B62                              
  • Brass – HTB1
  • Titanium – ASTM B367  
  • Hastelloy®          
  • Monel®               
  • Other materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

Designed specifically for Naval Applications.

 

BAV117 3pc bolted body FB

BAV117

3 pc bolted body - FB ball valve

The BAV117 is a 3 Piece bolted body, floating ball valve, with optional connections. Manufactured as standard in NiAlBr giving long service life on seawater applications.

In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 3"
Connections: Screwed & PN16.

Screwed rating: 300#

Materials

Regularly manufactured in a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800                  
  • Nickel Aluminium Bronze  - DS02 747 Part 3         
  • Gunmetal – DS02 830 Part 1       
  • Bronze – ASTM B61/B62                              
  • Brass – HTB1
  • Titanium – ASTM B367  
  • Hastelloy®          
  • Monel®               
  • Other materials available on request

 

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

Designed specifically for Naval Applications.

 

BAV118 2pc Forged FB

BAV118

2pc Forged / Wrought Ball Valve

The BAV118 is a flanged 2 Piece bolted body, full bore floating ball valve, of wrought / forged construction. Manufactured as standard in specialist alloys for long service life in highly corrosive applications.

In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 3"
Connections: ANSI 150

Materials

Regularly manufactured in a full range of materials including:

  • Nickel Aluminium Bronze             
  • Bronze
  • Titanium 
  • Hastelloy®  
  • Monel® 
  • Other materials available on request 

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

Designed specifically for Naval Applications.

BAV119 2pc Forged RB

BAV119

2pc Forged / Wrought Ball Valve

The BAV119 is a flanged 2 Piece bolted body, reduced bore floating ball valve, of wrought / forged construction. Manufactured as standard in specialist alloys for long service life in highly corrosive applications.

In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 3"
Connections: ANSI 150

Materials

Regularly manufactured in a full range of materials including:     

  • Nickel Aluminium Bronze
  • Bronze
  • Titanium             
  • Hastelloy®          
  • Monel®               
  • Other materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

Designed specifically for Naval Applications.

BAV12 Top Entry - FB

BAV12 Top Entry - FB

BAV14 3pc bar stock - RB

BAV14 3pc bar stock - RB

BAV15 3pc bar stock -FB

BAV15 3pc bar stock -FB

BAV56 1pc bar stock - RB

BAV56 1pc bar stock - RB

BAV12 Top Entry - FB

BAV12

Floating ball valve

The BAV12 is a top entry, full bore floating ball valve, with integral cast flanges. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 8" / Connections: ANSI 150 & 300.

Materials

Manufactured from a full range of materials including:

  • Nickel Aluminium Bronze – ASTM B148 C95800
  • Nickel Aluminium Bronze  - DS02 747 PART 3
  • Gunmetal – DS02 830 PART 1
  • Bronze – ASTM B61/B62
  • Brass – BS1400 HTB1
  • Titanium – ASTM B367
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • ISO 5211 mounting platform
  • Chevron packing on sizes ≥3”
  • Bolted Bonnet (3” and above)
  • Bi-directional Flow
  • Solid Ball

Options:

  • Bare shaft (for actuation by others)
  • Actuation to customer specifications
  • Locking facility (open & closed)
  • Extended stems (insulation allowance)

Specifications

  • ANSI B16.5 Flange Dimensions
  • ANSI B16.10 Face to Face Length
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV14 3pc bar stock - RB

BAV14

Bar-stock floating ball valve

The BAV14 is a 3 Piece barstock, reduced bore floating ball valve, made from bar stock. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 2" / Connections: Screwed
 
Max. Working Pressure 2000psig (137.93barg) with suitable seat material.

Materials

Manufactured from a full range of bar materials including:

  • Nickel Aluminium Bronze
  • Bronze
  • Titanium
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)
  • range of seat materials: PTFE, RPTFE, etc.

Specifications

  • ANSI B1-20.1 Screwed Ends
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV15 3pc bar stock -FB

BAV15

Bar-stock floating ball valve

The BAV15 is a 3 Piece barstock, full bore floating ball valve, made from bar stock. Manufactured as standard in NiAlBr give long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 3/8" to 2" / Connections: Screwed
 
Max. Working Pressure 2000 psig (137.93 barg) with suitable seat material.

Materials

Manufactured from a full range of bar materials including:

  • Nickel Aluminium Bronze
  • Bronze
  • Titanium
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)
  • Range of seat materials: PTFE, RPTFE, etc.

Specifications

  • ANSI B1-20.1 Screwed Ends
  • ANSI B16.34 Wall Thickness
  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
BAV56 1pc bar stock - RB

BAV56

Bar-stock floating ball valve

The BAV56 is a 1 Piece barstock, reduced bore floating ball valve, made from bar stock. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 3/4" to 2" / Connections: Screwed
 
Max. Working Pressure 2000 psig (137.93 barg) with suitable seat material.

Materials

Manufactured from a full range of bar materials including:

  • Nickel Aluminium Bronze
  • Bronze
  • Titanium
  • Hastelloy®
  • Monel®
  • Alternative body & seat materials available on request

Features

  • Anti-static / Anti blowout stem
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)
  • Range of seat materials: PTFE, RPTFE, etc.

Specifications

  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
  • ANSI B1-20.1 Screwed ends
BAV58 2pc bar stock - RB

BAV58 2pc bar stock - RB

BAV59 2pc bar stock - FB

BAV59 2pc bar stock - FB

BAV58 2pc bar stock - RB

BAV58

Bar-stock floating ball valve

The BAV58 is a 2 Piece, reduced bore floating ball valve, made from bar stock. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC.

Standard Range, Sizes: 1/2" to 2" / Connections: Screwed

Max. Working Pressure 2000 psig (137.93 barg) with suitable seat material.

Materials

Manufactured from a full range of bar materials including:

  • Nickel Aluminium Bronze
  • Bronze
  • Titanium
  • Hastelloy®
  • Monel®
  • Alternative body & seat materials available on request

Features

  • Anti-static / Anti blowout stem
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)
  • Range of seat materials PTFE, RPTFE, etc.

Specifications

  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
  • ANSI B1-20.1 Screwed Ends
BAV59 2pc bar stock - FB

BAV59

Bar-stock floating ball valve

The BAV59 is a 2 Piece barstock, full bore floating ball valve, made from bar stock. Manufactured as standard in NiAlBr giving long service life on seawater applications. In conformance with the Pressure Equipment Directive 97/23/EC. 

Standard Range, Sizes: 1/2" to 2" / Connections: Screwed
 
Max. Working Pressure 2000 psig (137.93 barg) with suitable seat material.

Materials

Manufactured from a full range of bar materials including:

  • Nickel Aluminium Bronze
  • Bronze
  • Titanium
  • Hastelloy®
  • Monel®
  • Alternative body & trim materials available on request

Features

  • Anti-static / Anti blowout stem
  • Cavity pressure relieving seats
  • Pressure equalising ball design
  • Bi-directional Flow
  • Solid Ball

Options:

  • Locking facility (open & closed)
  • Extended stems (insulation allowance)
  • Range of seat materials: PTFE, RPTFE, etc.

Specifications

  • PED Conformity
  • Designed generally in accordance with: API 6D & ISO 17292 (formerly BS5351)
  • ANSI B1-20.1 Screwed ends
close

Make an enquiry

Please fill in the form below and we'll try to get back to you as soon as possible.

close

Subscribe to our newsletter

We'd like to keep you informed of news and events at Brooksbank Valves. Please fill in the form below to receive the occasional e-newsletter from us.

Disclaimer

By signing up to our newsletter you consent to Brooksbank Valves sending our regular newsletter and occasional additional communications.

We do not pass on or share your data with any external companies or send any information not connected with Brooksbank Valves Ltd.

You can unsubscribe at any time using the links provided or by contacting info@brooksbank.co.uk